The Mac’s Vertical Home Lift PL-50 is designed and engineered for everyday home use.  It is easy to operate, easy to install and virtually maintenance free. Every safety detail has been carefully designed in the Mac’s Vertical Home Lift including a non-slip platform, constant pressure switches, a low platform for easy access, safety ramp and railing with all rolled edges. The Mac's Vertical Home Lift PL-50 is built to meet and exceed residential applications uses common household current and operates in all weather conditions, from -30 degrees to +120 degrees. The key-operated, constant pressure switch enables you to start, stop and change directions at any point, unlike many of the other lifts out there. The electrical system is placed well above ground and sealed against moisture. The lift is finished with an automotive grade powder coat to further protect the lift against the elements. The Mac’s Vertical Home Lift PL-50 is sturdy enough to lift and lower up to 750 lbs and will accommodate most electric wheelchairs and scooters. In fact we ran a PL-50 with a full 750 lb load,continuously on a cycle that lifted and lowered the platform 1 time a minute, 60 times an hour, 1,440 times a day with no rest. That lift ran for 3 months, outside on our roof and completed over 129,600 cycles without fail or need for maintenance. So if you were to use this lift 1 time a day your lift would run for over 355 years without a single lost day!You will not find a better built product on the market for your money. We are so sure of this that the Mac’s Vertical Home Lift PL-50 comes with a new 5 year limited warranty, another first for this industry. With over 35 years experience of manufacturing residential platform lift it is easy to see why a Mac’s Vertical Home Lift PL-50 is your best and safest choice.

• Las Vegas Mac’s Vertical Home Lift Technical Specifications MODEL: PL-50 and PL-72 SERIES: 750R RATED LOAD: 750 lbs maximum NUMBER OF PASSENGERS: 1 passenger with mobility equipment DRIVE: AC Powered lift: 1/2 hp instant reverse motor, 115 VAC, 5.9 amp DC Powered lift: 1/2 hp motor, 12 VDC INTERMEDIATE REDUCTION: V belt and pulley FINAL DRIVE: #50 drive chain MOTOR CONTROLLER: AC Powered lift: 24 VAC, 2 contactors; 1 up and 1 down DC Powered lift: 12 VDC, 2 contactors; 1 up and 1 down STANDARD CONTROL: Constant pressure paddle control with key switch SPEED: 10 feet per minute LIFTING HEIGHT: Model PL-50 has a 51” maximum lifting height Model PL-72 has a 72” maximum lifting height PLATFORM SIZE: 32” x 48”, straight thru platform (standard) 36” x 54”, 90 degree exit platform; LG 54 straight thru platform 36” x 60”, LG 90 degree exit platform, LG 60 straight thru platform MAIN FRAME CONSTRUCTION: Formed steel welded construction CARRIAGE CONSTRUCTION: Steel tubing and formed channel welded construction PLATFORM CONSTRUCTION: 1” steel tubing AUTOMATIC LOWER RAMP: 12” automatic lowering ramp MANUAL LOWERING DEVICE: Standard. Manual hand crank to raise and lower lift FINISH: Exterior grade powder coat paint, sandblast and primer LIMIT SWITCHES: Adjustable upper final limit switch WEIGHT OF UNIT: Model PL-50R: 425 lbs Model PL-72R: 475 lbs

Make Life Accessible Again with a Mac's Extended Vertical Lift

• Las Vegas Mac’s Extended Vertical Lift is designed and engineered for everyday home use.  It is easy to operate, easy to install and virtually maintenance free. Every safety detail has been carefully designed in the Mac’s Vertical Home Lift including a non-slip platform, constant pressure switches, a low platform for easy access, safety ramp and railing with all rolled edges.  The drive system uses common household current and operates in all weather conditions, from -30 degrees to +120 degrees. The key-operated, constant pressure switch enables you to start, stop and change directions at any point, unlike many of the other lifts out there. The electrical system is placed well above ground and sealed against moisture. The lift is finished with an automotive grade powder coat to further protect the lift against the elements.  The Mac’s Extended Vertical Lift is sturdy enough to lift and lower up to 750 lbs and will accommodate most electric wheelchairs and scooters. We have lifting heights available up to 107", 121", 134" and beyond. The highest we have manufactured to date is 168" rise.  The Mac’s Extended Vertical Lift is one tough, safe, reliable and affordable lift. Compare it against all the competition.  You will not find a better built product on the market for your money. We are so sure of this that the Mac’s Extended Vertical Lift comes with a 2 year limited warranty. With over 35 years experience of manufacturing residential platform lift it is easy to see why a Mac’s Vertical Home Lift PL-50 is your best and safest choice.